steel
304 stainless steel — Core 304/4301
General stainless grade with forming and welding applications; surface finish and corrosion environment still require specification.
Materials Atlas / Engineering materials
From a material to
something you can make.
Explore grades, conditions, substrates and chemicals. Start with a sourced specification, then build a request that a supplier can actually quote.
steel
316L stainless steel — Supra 316L/4404
A molybdenum-bearing stainless option for corrosion-focused equipment; suitability depends on the actual chemical environment.
steel
Duplex stainless steel — Forta DX 2205
A duplex grade combining austenitic and ferritic phases; welding and thermal history belong in the specification.
steel
Hardox 450 wear plate
Wear plate for abrasive service; hardness limits depend on thickness and product form.
nonferrous alloy
6061-T6 aluminum extrusion
General-purpose extruded alloy for machined or structural components; properties must be checked for the section and temper.
nonferrous alloy
7075-T6 aluminum rod and bar
High-strength rod/bar option; the manufacturer distinguishes T6 strength from the stress-corrosion behavior of T73.
nonferrous alloy
Ti-6Al-4V Grade 5 — annealed bar
Annealed Grade 5 bar used in engineered components; acceptance includes chemistry, microstructure and tensile testing.
nonferrous alloy
INCONEL alloy 625
Nickel alloy for corrosion and elevated-temperature applications; product and heat-treatment condition must be selected.
nonferrous alloy
INCONEL alloy 718
Precipitation-strengthened alloy used for turbine, fastener and cryogenic components; a specific anneal/age schedule is essential.
substrate
Float-zone silicon wafer
FZ wafers provide a route to low oxygen content for power and electrical applications; doping and resistivity require separate selection.
substrate
Czochralski silicon wafer
A commercial silicon-wafer growth route; oxygen, defect and electrical specifications must follow the selected product.
substrate
Conductive 4H-SiC substrate
Substrate route for power electronics; bare wafer and epitaxial wafer products remain distinct.
substrate
GaN-on-sapphire template — MTI 4–5 µm film
Research template with a reported GaN film thickness range; specify layer and substrate requirements independently.
substrate
A-plane sapphire — MTI ALA101010S2
Polished sapphire substrate with an explicit orientation and form; useful as an insulating crystal platform.
substrate
Unpatterned ITO glass — Ossila S111
Transparent conductive glass for research; sheet resistance belongs to the ITO film, not bulk glass.
ceramic
CoorsTek AD-96 alumina
Manufacturer-specific alumina formulation for insulating or wear-related components; purity alone does not define performance.
ceramic
CoorsTek AD-995 alumina
Manufacturer-specific alumina formulation for insulating or wear-related components; purity alone does not define performance.
ceramic
CoorsTek AlN 180
Electrically insulating ceramic for heat-management components; the exact formulation and processing route matter.
ceramic
CoorsTek SN-101C silicon nitride
Silicon-nitride grade for demanding mechanical and thermal service; finish and forming route require application-specific review.
ceramic
CoorsTek sintered YTZP zirconia
Sintered zirconia grade for mechanical components; the source separately lists HIPped YTZP.
polymer
Victrex PEEK 450G
Injection-molding and extrusion grade; processing and specimen history affect the resulting part.
polymer
Victrex PEEK 450GL30
Reinforced molding/extrusion grade; fiber alignment and flow history matter to finished-part properties.
polymer
DuPont Kapton HN polyimide film
Insulating film family supplied in multiple thicknesses; gauge and test direction must accompany a property comparison.
polymer
Ensinger TECAFLON PTFE natural
PTFE stock material for engineered parts; creep, thermal expansion and actual service environment need specification.
polymer
Ensinger TECAFORM AH natural
Machinable acetal stock material; it remains distinct from POM homopolymer and filled grades.
polymer
Syensqo Solef 5130/1001 PVDF
PVDF powder used in lithium-battery binder work; slurry and electrode performance require separate formulation evidence.
chemical
Lithium carbonate — Sigma-Aldrich 203629
Research precursor with an explicit trace-metals purity basis.
chemical
Lithium hydroxide monohydrate — Sigma-Aldrich 254274
Hydrated lithium precursor; water of crystallization is part of chemical identity.
chemical
Lithium hexafluorophosphate — Sigma-Aldrich 450227
Battery-research salt with an explicit trace-metals assay basis.
chemical
Sodium hexafluorophosphate — TCI S0392
Electrolyte-research salt; the supplier lists a titration-based purity specification.
chemical
Anhydrous NMP — Sigma-Aldrich 328634
Anhydrous solvent grade; purity and water specification remain distinct from a complete processing recipe.
A grade name alone does not define performance. Processing, product form, dimensions and test conditions can change the properties you receive. These records help prepare a specification; supplier documentation and acceptance testing complete it.