polymer / 450G
Victrex PEEK 450G
Injection-molding and extrusion grade; processing and specimen history affect the resulting part.
Identity and condition
- Designation
- 450G
- Condition
- Unreinforced, semicrystalline
- Product forms
- granules
- Composition
- Unfilled polyetheretherketone.
- Standards
- No standard established in this record
Reported properties
Keep the qualifier and conditions attached to each value. Typical values are not guaranteed lot specifications.
Scroll the table sideways to inspect all conditions and sources.
| Property | Value | Conditions & method | Evidence |
|---|---|---|---|
| Nominal tensile modulus | 4,000 MPanominal | 23 °C450GMethod: ISO 527-1Uncertainty: not reported | Source ↗Material properties; tensile modulus and yield stress at 23 °C |
| Nominal tensile stress at yield | 98 MPanominal | 23 °C450GMethod: ISO 527-2Uncertainty: not reported | Source ↗Material properties; tensile modulus and yield stress at 23 °C |
What to confirm
- Resin datasheet values are not guaranteed values for a machined or printed finished part.
- Source-level reference, not a certified lot or guaranteed design value. Confirm the exact product, condition and applicable standard revision.
Sources and traceability
Victrex PEEK 450G technical datasheet ↗
Material properties; tensile modulus and yield stress at 23 °C